Basic Info
| Model NO.:DS206 |
Material:PVDF |
| Usage:Engineering Plastics |
Color:White |
| Package:Paper Drum |
Specification:ASTM |
| Trademark:BNS |
Origin:China |
| HS Code:3904690000 |
Production Capacity:100tons/Month |
PVDF resin for injection molding DS206 have lower melting viscosity, it is more suitable for manufacturing PVDF finished products by injection molding.
PVDF DS206 resin for injection molding as raw materials, the finished products has excellent mechanical strength and tenacity, It can not be eroded by acid, alkali, strong oxidant, halogens, good durability to aliphatic hydrocarbons, aromatic hydrocarbons, alcohol, aldehyde etc, In the work of hydrochloric acid, nitric acid, sulfuric acid, dilute alkali liquor, dense alkali liquor(40%) and 100deg. C temperature, its performance not be changed. Others, Z-1 PVDF finished products has the properties of y-Ray resistant, UV resistant, and durability in wide temperature range.
Application: Be used in manufacturing PVDF pall ring, PVDF teller rosette ring, PVDF valves.
|
Properties |
Typical Values |
Standard |
|
General Appearance |
White translucent pellets |
|
|
Odor |
None |
|
|
Standard specific gravity |
1.77-1.79 |
ASTM D792,at 23/23C |
|
Melting point |
165-171C |
ASTM D3418,10C/min |
|
Melt flow index |
15-25g/10min |
ASTM D1238,230C/5kg |
|
Water absorption |
≤0.05% |
ASTM D570 |
|
Tensile yield strength |
≥40MPa |
ASTM D638,50mm/min at 23C |
|
Yield elongation |
5-10% |
ASTM D638,50mm/min at 23C |
|
Tensile strength at break |
≥30MPa |
ASTM D638,50mm/min at 23C |
|
Elongation at break |
≥50% |
ASTM D638,50mm/min at 23C |
|
Hardness,Shore D |
70-80 |
ASTM D2240 |
|
Flammability |
V-0 |
UL 94 |
Click image to view full size image
E-mail: 